Magenta- 2.85mm Recreus FilaFlex 82A Original 3D Printing Filament 500G

Recreus Filaflex 82A is the original elastic filament for 3d printers, this new revolutionary material is a TPE (thermoplastic elastomer) with a polyurethane base and some additives to make it printable in your 3d printer. Recreus Filaflex 82A has an incredible elasticity that allows you to create elastic printed parts for your projects.


  • +-0.05mm tolerance
  • High adhesion with 3d printed bed
  • Do not need heatbed
  • Do not need kapton or blue tape.
  • Do not need hairspray or special adhesion spray
  • Odorless
  • Resistant to acetone, fuel and solvent.


    General printing guidelines*

    Nozzle Diameter0.4mm or higher
    Layer Height0.2mm
    Flow rate± 105 – 115%
    Suggested Printing Temperature210 – 250° C

    Print speed7-10 mm/s

    *)Above displayed settings are meant as guidance to find your optimal print settings.

    Material Safety and Technical Data Sheet

    Copyright © 2016 3D Lab Store. All rights reserved. NOTE: All brand names, trademarks, service marks, product names and logos appearing on the site are the property of their respective owners and are referred to here for purposes of description only. - powered by Enfold WordPress Theme