filaflex_conductive_1

Black – 1.75mm Recreus Conductive Filaflex 500g

Recreus Conductive Filaflex is a flexible, electrically conductive TPU filament with a shore hardness 92A, designed for the manufacture of electrically conductive parts or components and ideal for the creation of wearable devices. Thanks to its 92A shore hardness, it is compatible with 90% of the 3D printers on the market. It provides two of the most coveted properties in 3D printing: flexibility and conductivity.

It has an electrical resistance of approximately 3.9 Ω-cm. To determine if the material will fulfil the functions in a certain project, it must take into account that the resistance changes depending on its impression.

To successfully use Recreus Conductive Filaflex filament in electronic applications, the electrical resistance of the circuit must be considered and it must take into account that this filament is designed for low current applications.

Features:
– Shore hardness 92A
– 
Flexible and conductive
– Made in the EU

$748.00

SKU: REC/CON/FIL/BLA/175/500g Categories: ,

General Printing Guidelines*

NOZZLE DIAMETER≥ 0.15 毫米
LAYER HEIGHT≥ 0.1 毫米
FLOW RATE± 100%
SUGGESTED PRINTING TEMPERATURE245 – 250° C
SUGGESTED HEAT BED TEMPERATURE50 – 60° C
PRINT SPEED20 毫米/ 秒
RETRACTION以40 毫米/ 秒, 回縮 2-3 毫米
FAN SPEED50-100%

*) Above displayed settings are meant as guidance to find your optimal print settings.

Material Safety and Technical Data Sheet

Copyright © 2016-2023 3D Lab Store. All rights reserved. NOTE: All brand names, trademarks, service marks, product names and logos appearing on the site are the property of their respective owners and are referred to here for purposes of description only.