Formfutura EasyClean Resin Cleaner 1000ml

EasyClean resin cleaner is chemically engineered to safely and effectively remove any uncured photopolymer 3D printing resin in the range of 385 – 420nm from SLA, DLP, or LCD 3D printed objects. EasyClean is made from organic solvents and is safer and more effective than Isopropyl Alcohol (IPA) and can be used roughly 3 times longer than IPA.

**The filament complies with EU safety standards

Key features

  • Superb cleaning properties
  • Breaks down resin better than IPA and other solutions
  • Doesn’t leave any residue, cloudiness, or white haze
  • No sticky prints
  • Compatible with all UV curable resins for SLA, DLP, and LCD 3D printing technologies
  • Compatible for cleaning with magnetic stirrers, ultrasonic cleaners, and washing/curing stations
  • No transport restrictions
  • Not classified as a dangerous good by ADR and IATA
  • Non-flammable
  • Limited odor
  • Can also be used for cleaning build plates, vats, and other surfaces that come in contact with resins
  • Long shelflife up to 24 months

How to use

  1. Put the resin print in a tub filled with EasyClean resin cleaner
  2. Clean for 10-15 minutes when cleaning by hand, or 5 minutes when using an ultrasonic cleaner
  3. After cleaning let the printed object dry or rinse with tap water


Store EasyClean in a well-ventilated area in its original HDPE bottle, or jerrycan. Make sure the bottle or jerrycan is tightly closed and stored at a temperature below 25°C. When stored properly EasyClean Resin Cleaner has a shelflife up to 24 months.

Regarding shipping policies, please refer to here.


Material Safety and Technical Data Sheets

Copyright © 2016-2023 3D Lab Store. All rights reserved. NOTE: All brand names, trademarks, service marks, product names and logos appearing on the site are the property of their respective owners and are referred to here for purposes of description only.