DimaFix Pen

DimaFix – Pen  for 3D Printing Adhesive

Good adhesion of your print to the printbed is a must in 3D printing! In order to keep your object fixed during printing and avoid warping, there is now DimaFix – Pen. DimaFix Pen is a new product based on the Dimafix – Fixative Spray (an aerosol spray adhesive for 3D printers with a heated printbed, which prevents warping of large-scale objects).

Dimafix – Pen  for 3D Printing Adhesive  maintains the same adhesion properties as the Dimafix adhesive aerosol spray that offers a strong bond between the first layer and the build plate when the bed is heated above 60ºC. Below 60ºC Dimafix becomes inactive, so prints can easily be removed from the build plate. DimaFix – Pen provides a strong bond between glass and plastic that is easy to break when needed. Dimafix is completely water soluble, so cleaning the build plate is an easy process. The Dimafix – Pen 3D Printing Adhesive can be used more than 100 times and does not contain any gas.

Different print bed temperature results in different levels of adhesion:

Below 60ºC:     Low adhesion, the objects can be detached from the plate.

60 – 85ºC:         Average adhesion, for simple geometries.

85 – 95ºC:          High adhesion, for complex geometries and lengthy prints.

Above 95ºC:     Very high adhesion, for very complex geometries and very lengthy prints.

Regarding shipping policies, please refer to here.


SKU: FF-DIMAFIXPEN-90ML Categories: ,

Material Safety and Technical Data Sheets

Copyright © 2016-2023 3D Lab Store. All rights reserved. NOTE: All brand names, trademarks, service marks, product names and logos appearing on the site are the property of their respective owners and are referred to here for purposes of description only.