magicfil

Grey – 2.85mm Formfutura MagicFil Thermo PLA 3D Printing Filament 500g

Formfutura MagicFil Thermo PLA is based on our EasyFil PLA compound, but with a touch of thermochromic magic added, as MagicFil has a colour changing ability when heated above 29° C. MagicFil’s anthracite grey colour will change into a natural PLA colour when the material reaches a temperature of 29° C or above.
Being based on our EasyFil PLA compound make MagicFil Thermo PLA a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. MagicFil Thermo PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make it an extremely easy to print filament.

**The filament complies with EU safety standards

Unique features

  • Colour changing ability from anthracite grey to natural PLA at 29° C
  • Anthracite grey colour < 29° C > natural PLA colour
  • Very easy to print
  • Warp-free printing and no deformation after cooling
  • Improved flowing behaviour and inter-layer adhesion
  • Good first layer adhesion to several (un)heated print surfaces
  • Slightly softer than standard PLA resulting in improved strength and impact resistance
  • Almost odourless processing/printing
  • Biodegradable

Filament length:± 63m

$518.00

SKU: 285THER-GRE-0500 Categories: , , , ,

General printing guidelines*

Nozzle size≥ 0.15mm
Layer height≥ 0.1mm
Flow rate± 100
Suggested Printing Temperature200 – 230° C

Suggested Heat bed temperature0 – 60° C
Print speedMedium
RetractionYes ± 5mm
Fan speed50-100%

*)Above displayed settings are meant as guidance to find your optimal print settings.

Material Safety and Technical Data Sheets

Copyright © 2016-2023 3D Lab Store. All rights reserved. NOTE: All brand names, trademarks, service marks, product names and logos appearing on the site are the property of their respective owners and are referred to here for purposes of description only.