glow_in_the_dark

2.85mm Formfutura EasyFil PLA Glow in the Dark 3D Printing Filament 750G

Formfutura EasyFil PLA Glow in the Dark 3D Printing Filament is a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. Formfutura EasyFil PLA 3D Printing Filament is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make Formfutura EasyFil PLA 3D Printing Filament an extremely easy to print filament.

**The filament complies with EU safety standards

Unique features

Very easy to print
Warp-free printing and no deformation after cooling
Improved flowing behaviour and inter-layer adhesion
Good first layer adhesion to several (un)heated print surfaces
Slightly softer than standard PLA resulting in improved strength and impact resistance
Almost odourless processing/printing
Biodegradable
Wide variety of vivid opaque colors

Filament length:± 95m

$398.00

SKU: FOR/PLA/GLO/INT/DAR/285/750 Categories: , , , ,

General printing guidelines*

Nozzle size≥ 0.15mm
Layer height≥ 0.1mm
Flow rate± 100
Suggested Printing Temperature200 – 230° C

Suggested Heat bed temperature0 – 60° C
Print speedMedium
RetractionYes ± 5mm
Fan speed50-100%

*)Above displayed settings are meant as guidance to find your optimal print settings.

Material Safety and Technical Data Sheets

Copyright © 2016-2023 3D Lab Store. All rights reserved. NOTE: All brand names, trademarks, service marks, product names and logos appearing on the site are the property of their respective owners and are referred to here for purposes of description only.