Anycubic Wash and Cure Plus

Anycubic Wash and Cure Plus is a 3D printing post-processing device whose main function is to clean and cure 3D printing models. It is suitable for models printed by LCD, SLA and DLP 3D printers.

With Anycubic Wash and Cure Plus, you can save time and easily handle 3D printed pieces at all stages of the component processing process, helping to address the post-processing needs faced by large photocure models. It supports model cleaning and curing, and its stronger cleaning strength makes it easier to achieve higher productivity. It also supports washable resins. A cleaning tank is first used to remove residual resin, then the print is cured with a UV lamp to ensure that it is fully cured and not susceptible to interference from UV light in the environment.

In addition, the Anycubic Wash and Cure Plus cleaning and curing machine also features a rolling bearing design that allows you to easily rotate the print for easy cleaning and curing. Anycubic Wash and Cure Plus, Wash&Cure Plus is 290 x 270 x 490 mm in size and supports 192 x 120 x 245 mm in wash mode and D190 x 245 mm in cure mode.

Anycubic Wash and Cure Plus has an L-shaped UV lamp design with an array of 20 LED beads. The L-shaped UV lamp strip can be bent to ensure 360 degree curing at the top and bottom of the model through the reflection of the rotating table, this feature allows each model to cure seamlessly.

Anycubic Wash and Cure Plus main function:

  • large size
  • 360° Curing
  • Upgraded UV Lamp Beads
  • More Powerful Washing
  • Stronger Cleaning Power
  • Safer To Use
  • Anti-UV light Cover
  • Easier Mode Switching
  • Enclosed Washing Bucket

Regarding shipping, please refer to here.


360° Curing

The 360°auto-rotating curing platform, equipped with L-shape strip light and reflective mirror sticker, The 360°auto-rotating curing platform, equipped with L-shape strip light and reflective mirror sticker, enables the machine to realize a real thorough curing.

Upgraded UV Lamp Beads

Added with optical lens, the UV light source can achieve more even irradiation and thorough curing.

Anti-UV light Cover

The integrated anti-UV cover is able to block 99.95% 405nm wavelength UV light.

Enclosed Washing Bucket

The washing bucket can accommodate larger size models and is compatible with all LCD resin printers of 8.9-inch and below on the market.


Machine: Anycubic Wash and Cure Plus
Control method: Digital tube, LED indicator, Control knob
Rated power: 40W
Input voltage: AC110/240V 50/60Hz
UV lights: 405nm
Time selection: :1-60min
Machine size: 290mm(L)*270mm(W)*479mm(H)
Basket washing size: 192mm(L)*120mm(W)*290mm(H)
Hanging cleaning size: 192mm(L)*120mm(W)*235mm(H)
Curing size: 190mm(D)*245mm(H)
Weight: ~6.5kg


Copyright © 2016-2021 3D Lab Store. All rights reserved. NOTE: All brand names, trademarks, service marks, product names and logos appearing on the site are the property of their respective owners and are referred to here for purposes of description only. - powered by Enfold WordPress Theme