Flashforge_DLP_Resin

Flashforge DLP Resin/ 500ml

DLP Standard Resin:

Standard Resin is a photosensitive resin, which is suitable to use in DLP 3D printers.

Standard Resin shows great modeling effect on both suspended structure and flowing structure, final printing result is smooth and neat with refined details. Designed for high precision pattern production, Standard Resin is ideal for rapid prototyping and production.

Produced under strict manufacturing and quality control standards, Standard Resin has high stability, with low shrinkage and low failure rates.

DLP Castable Resin:

Castable Resin is a photosensitive resin, which is suitable for DLP 3D printers.

Castable Resin has many advantages such as nontoxic, low odor, high detail and rapid curing. The printed models show good strength, toughness, flexibility and high impact resistance. The resin burns out cleanly with no ash or residue.

Material Specification:
– Smooth surface finish
– Captures fine detail

Product Selection:

  • Standard Resin
  • Castable Resin

Features

Flashforge Standard Resin

DENSITY1.09 – 1.12 g/ml
VISCOSITY400 ~ 550 cps
HARDNESS85D
TENSILE STRENGTH42 MPa
EONGATION AT BREAK17%
EXPOSURE EC6 mj/cm2
PENETRATION DEPTH0.2 mm

Flashforge Castable Resin

TENSILE STRENGTH10 MPa
EONGATION AT BREAK8.5%
HARDNESS70D
FLEXURAL STRENGTH27 MPa
FLEXURAL MODULUS920 MPa
VOLUMETRIC SHRINKAGE5.58 – 6.02%
Copyright © 2016-2023 3D Lab Store. All rights reserved. NOTE: All brand names, trademarks, service marks, product names and logos appearing on the site are the property of their respective owners and are referred to here for purposes of description only.