Recreus 95A Skin

Nude – 1.75mm Recreus FilaFlex 95A Original 3D Printing Filament 500G

Recreus FilaFlex 95A Original 3D Printing Filament allows making flexible and resistant parts, being also compatible with most of the 3d printers on the market. The new reformulation and  Shore hardness 95A allows printing at a higher speed than any other flexible filament, and similar printing settings as PLA filaments. Recreus FilaFlex 95A Original 3D Printing Filament is very simple to use without making any modifications in your 3d printer.


  • Diameter tolerance +/- 0.04mm
  • Compatible with bowden type printers.
  • High elasticity and excellent abrasion resistance
  • No need for heatbed, blue-tape or buildtak surface.(for huge parts we recommend glue stick)
  • Odorless
  • Resistant to common solvents (acetone, fuel etc.)


SKU: REC/95A/SKI/1.75/500 Categories: , ,

General printing guidelines*

Nozzle size≥ 0.4mm
Layer height0.08-0.3 (for nozzle 0.4mm) Optimal results with height 0.2mm
Suggested Printing Temperature215 – 225° C FOR DIRECT DRIVE 3D PRINTERS

Print speed7-10mm / s
Retraction Speed25-45mm / s
Retraction Distance1-2mm
Traveling speed160-200mm / s

*)Above displayed settings are meant as guidance to find your optimal print settings.


Material Safety and Technical Data Sheet

Copyright © 2016-2023 3D Lab Store. All rights reserved. NOTE: All brand names, trademarks, service marks, product names and logos appearing on the site are the property of their respective owners and are referred to here for purposes of description only.