formfutura-ancient brass-metafil1.75_filament

Ancient Brass- 1.75mm Formfutura Metalfil 3D Printing Filament 750G

Formfutura Metalfil 3D Printing Filament – Brass is a metal-filled PLA-based filament with approximately 70% of gravimetric brass filling. This incredible high filling with brass powders enables every FDM 3D printer user to 3D print brass objects which are almost indistinguishable from genuine brass casted objects. Formfutura Metalfil 3D Printing Filament – Brass is easy to print and can be printed on full metal, PEEK, and PFTE hotends and can perfectly be printed with ≥ 0.4mm nozzles with retraction settings enabled on both direct drive extruders, as well as on Bowden style extruders, which is a truly unique feature for a metal-filled filament. Formfutura Metalfil 3D Printing Filament Brass printed objects are extremely easy to polish.

Unique features

  • 70% filled with brass powder
    • Real brass look and “cold” brass metal feel
    • o More than twice as heavy compared to PLA (density of 2.78 g/cc)
  • Easy to post-process
    • MetalFil Brass can be brushed, sanded, polished, waxed and coated
  • Very easy to print on both direct drive & Bowden style extruders
    • Warp-free printing and no deformation after cooling
    • Improved flowing behaviour and inter-layer adhesion
    • Good first layer adhesion to several (un)heated print surfaces

Filament length:±112m


General printing guidelines*

Nozzle size≥ 0.4mm
Layer height≥ 0.1mm
Flow Rate104%
Suggested Printing Temperature215 – 235° C

Suggested Heat bed temperature0 – 60° C
Fan speed50-100%
RetractionYes ± 5mm

*)Above displayed settings are meant as guidance to find your optimal print settings.

Technical Data Sheet

Copyright © 2016-2021 3D Lab Store. All rights reserved. NOTE: All brand names, trademarks, service marks, product names and logos appearing on the site are the property of their respective owners and are referred to here for purposes of description only. - powered by Enfold WordPress Theme