formfutura_thibra3dskulpt_original_1.75_filament

Original- 1.75mm Formfutura Thibra 3D Skulpt 3D Printing Filament 750G

Formfutura Thibra 3D Skulpt 3D Printing Filament is a unique sculptable 3D printer filament materialized by Thibra3D, which allows one to post process SKULPT 3D printed objects similar to sculpting clay. By projecting a temperature of ± 70° C on the SKULPT 3D printed object it will be possible to tweak and finetune the 3D printed object by sculpting it or remodelling it slightly.
Visible 3D printed layers and imperfections caused by blobs, zits, zippers and removed support structures on the SKULPT 3D printed object can very easily be remodelled into a perfect smooth service and even detailed accents can be sculpted into the surface of the SKULPT 3D printed object.

Unique features

Sculptable by applying heat
Use a heat gun to project a temperature of ± 70°C to the part of the SKULPT 3D printed object which requires finetuning by sculpting and/or remodeling
Easily smooth out visible 3D printed layers and imperfections caused by blobs, zits and removed support structures
Very easy to paint with acrylic paints
SKULPT 3D printed object only has to be degreased with soap and lukewarm water before painting
SKULPT 3D printed objects can be polished
Repeatedly sculptable and reusable
SKULPT 3D printed objects can continuously sculpted by remodeling, carving, cutting, adding extra material SKULPT material, etc…
Leftover support structures can be reused for sculpting
Does not dry out or crack
Self-supporting
3D print support structures with the same SKULPT 3D printer filament as used for the primary objects as the object can perfectly be smoothed out and leftover support material can be reused for sculpting

Application:

industrial designers, prototyping, artists, architects, prop makers

Filament length:±247m

$628.00

    General printing guidelines*

    Nozzle size≥ 0.4mm
    Layer height≥ 0.2mm
    Flow rate± 110 – 121%**
    Suggested Printing Temperature190 – 230° C***

    Suggested Heat bed temperature45 – 60° C****
    Print speedMedium
    RetractionYes ± 1.5-3mm
    Fan speed60-100%

    *)Above displayed settings are meant as guidance to find your optimal print settings.

    **)When 3D printing with SKULPT 3D printer filament on a 3D printer that uses 2.85mm SKULPT filament it is recommended to increase the flow rate to ± 121% (benchmarked on Ultimaker 2). When 3D printing with SKULPT 3D printer filament on a 3D printer that uses 1.75mm SKULPT filament it is recommended to increase the flow rate to ± 110% (benchmarked on Prusa I3 MK2).

    ***) For printers that use a 2.85mm SKULPT 3D printer filament the recommended printing (nozzle) temperature range is ± 200 – 220° C (benchmarked on Ultimaker 2. For printers that use a 1.75mm SKULPT 3D printer filament the recommended printing (nozzle) temperature range is ± 190 – 210° C (benchmarked on Prusa I3 MK2).

    ****)The heated bed should be set at 60° C for 3D printing the first layer of your SKULPT 3D printed object and then lowered 45° C for 3D printing the remainder of your SKULPT 3D printed object .

    Video

    Technical Data Sheet

    Download
    Copyright © 2016 3D Lab Store. All rights reserved. NOTE: All brand names, trademarks, service marks, product names and logos appearing on the site are the property of their respective owners and are referred to here for purposes of description only. - powered by Enfold WordPress Theme
    Grey – 1.75mm Formfutura Easyfil ABS 3D Printing Filament 750g grey formfutura_thibra3dskulpt_original_1.75_filament Original- 2.85mm Formfutura Thibra 3D Skulpt 3D Printing Filament 750G