felix pro 3 touch

Felix Pro 3 Touch 3D Printer

The FELIX Pro 3 Touch is manufactured by Dutch manufacturer FELIXprinters. FELIX Pro 3 Touch have been significantly improved compared with its predecessor Felix Pro 2 in many aspects such as:

New dual radial blower cooling system generate 3 times more powers compared to it’s predecessor, so that the cooling power are much stronger which enable more detailed prints.

New extruder heating up system which allows promptly increase from 25°C to 200°C within around 30s.

New generation of dual head system with quickswap feature. The new advanced dual head system will make the stand-by print head flip back when another print head is active during printing. The advantage of the flipping mechanism can prevent the material leakage from non-used print head onto the printed object, and prevent collision of non-used print head with the printed object.

Both printheads are quipped with new probe sensor so that the distance between nozzle to build plate are more accurate, delivering higher printing quality.

Fully automatic calibration to create an optimal starting conditions of the print.

Embedded camera for remote monitoring of the printing status.

Embedded filament detection sensor which can automatically pause the printing job if lack of filament is detected. Users can resume the print after reloading new filament.

Flexible metal heat bed which allows user to remove the printout easily.

Only 34 dBA during printing so that user can enjoy working without interruptions.

The team behind the FELIX Pro series bring together many years of engineering and 3D printing experience to overcome the difficulties that many 3D printer users encounter during 3D printing. The results can be found in the Pro 3 through its robust construction, automated features, ease of use, incredibly low noise emissions and print quality.

On the other hand, this product comes with a professional slicing software Simplify 3D for free.

FELIX Pro 3 Touch Main Features:

  • New fan cooling system
  • Rapid heating
  • Swinging dual nozzle design
  • New detection system
  • Fully automatic calibration
  • Built-in cameras
  • Built-in filament detector
  • Flexible heated metal printing platform
  • Quiet operation
  • High quality details

Regarding shipping policies, please refer to here

The FELIX Pro 3 Touch is manufactured by Dutch manufacturer FELIXprinters. FELIX Pro 3 Touch have been significantly improved compared with its predecessor Felix Pro 2 in many aspects such as:

New dual radial blower cooling system generate 3 times more powers compared to it’s predecessor, so that the cooling power are much stronger which enable more detailed prints.

New extruder heating up system which allows promptly increase from 25°C to 200°C within around 30s.

New generation of dual head system with quickswap feature. The new advanced dual head system will make the stand-by print head flip back when another print head is active during printing. The advantage of the flipping mechanism can prevent the material leakage from non-used print head onto the printed object, and prevent collision of non-used print head with the printed object.

Both printheads are quipped with new probe sensor so that the distance between nozzle to build plate are more accurate, delivering higher printing quality.

Fully automatic calibration to create an optimal starting conditions of the print.

Embedded camera for remote monitoring of the printing status.

Embedded filament detection sensor which can automatically pause the printing job if lack of filament is detected. Users can resume the print after reloading new filament.

Flexible metal heat bed which allows user to remove the printout easily.

Only 34 dBA during printing so that user can enjoy working without interruptions.

The team behind the FELIX Pro series bring together many years of engineering and 3D printing experience to overcome the difficulties that many 3D printer users encounter during 3D printing. The results can be found in the Pro 3 through its robust construction, automated features, ease of use, incredibly low noise emissions and print quality.

On the other hand, this product comes with a professional slicing software Simplify 3D for free.

Regarding shipping policies, please refer to here

FELIX Pro 3 Touch Main Features:

– New fan cooling system
– Rapid heating
– Swinging dual nozzle design
– New detection system
– Fully automatic calibration
– Built-in cameras
– Built-in filament detector
– Flexible heated metal printing platform
– Quiet operation
– High quality details

$33,880.00

Product Features

搖擺式雙噴頭設計

New generation of dual head system

flexible build plate

Flexible heat bed

Swappable print head

Quickswap printheads

camera

Embedded Camera

Fully Automatically Calibration

Specifications

Printer Model
FELIX Pro 3 Touch
Layer Height
0.05 - 0.25mm
Printing Accuracy 
XY: 0.0016 mm Z: 0.00015 mm
Extruder Quantity
2
Nozzle Size 
0.35mm (Optional 0.5mm / 0.7 mm)
Maximum Printing Temperature
275 °C
Maximum Build Plate Temperature
100°C
Supported Materials
PLA, PETG, Flex, ABS, PVA, Wood, Glass, etc.
Filament Diameter
1.75mm
Build Volume
235 L x 244 W x 235 H mm
Product Dimension
420 L x 400 W x 550 H mm
Levelling and Calibration
Auto-Leveling
Quick Detachable Extruder
Yes
Flexible Build Plate 
Yes
Built-In Camera 
Yes
Connectivity
WiFi, USB Stick, Ethernet
Software and Firmware
Repetier Host, Simplify3D
Supported File Types
STL, OBJ, 3MF

Product Videos

Download

FELIXPrinters Repetier Host Slicing Software

Copyright © 2016-2023 3D Lab Store. All rights reserved. NOTE: All brand names, trademarks, service marks, product names and logos appearing on the site are the property of their respective owners and are referred to here for purposes of description only.